The Biggest Furnace & The Best Savings, for up to 9,000 sq. ft.
The Clean Energy Heating Systems CE-330 Waste Oil Furnace is our largest heater, and is perfect for quickly and effectively heating a garage with 7 or more bays. With up to 325,000 BTU’s of output coupled to our innovative new furnace design, the CE-330 is truly a hot performer.
All Clean Energy furnaces are engineered from the ground up to burn waste oils and comply with all EPA regulations. They easily install and provide for longer intervals between cleanings. Their low-profile design and flexible configuration is ideal for areas with limited ceiling height and other creative installation requirements.
Best of all, every Clean Energy waste oil furnace is built with an exclusive, patent-pending stainless steel heat exchanger and flue tubes. This next-generation design ensures long-lasting durability and highly efficient operation for years to come.
PRODUCT FEATURES:
Stainless Steel Heat Exchanger and Flue Tubes – Prevents rust & Increases the Life of the Furnace!
Heat Exchanger and Flue Tubes are designed to limit heat escape & maximize the heat produced
Flue Tubes are swedged, not welded, to resist cracking over years of heavy use
Digital Wall-Thermostat & Digital, programmable burner control for reliable operation in all conditions
Over-Center Latches allow for easy clean-out without tools
10 Year Warranty
UL & cUL Listed
Made in the USA
PRODUCT SPECIFICATIONS:
325,000 BTU/hour Input
3,700/85°F, air flow output CFM/heat rise
230 vac, 60hz, single phase, 30A breaker
Acceptable fuels: used crankcase oil, transmission fluids, hydraulic oil, #2 heating oil (diesel fuel) and most synthetic oils
The NEW CE-440 Waste Oil Furnace is Clean Energy’s largest and most powerful furnace yet, designed to turn used oil into free heat in even the biggest and tallest spaces. With up to 420,000 BTUs of heating power and all of Clean Energy’s patent-pending design advances, it’s the ultimate way to heat warehouses, garages and other large spaces.
All Clean Energy furnaces are engineered from the ground up to burn waste oils and comply with all EPA regulations. They easily install and provide for longer intervals between cleanings. Their low-profile design and flexible configuration is ideal for areas with limited ceiling height and other creative installation requirements.
Best of all, every Clean Energy waste oil furnace is built with an exclusive, patent-pending stainless steel heat exchanger and flue tubes. This next-generation design ensures long-lasting durability and highly efficient operation for years to come.
PRODUCT FEATURES:
Stainless Steel Heat Exchanger and Flue Tubes – Prevents rust & Increases the Life of the Furnace!
Heat Exchanger and Flue Tubes are designed to limit heat escape & maximize the heat produced
Flue Tubes are swedged, not welded, to resist cracking over years of heavy use
Digital Wall-Thermostat & Digital, programmable burner control for reliable operation in all conditions
Over-Center Latches allow for easy clean-out without tools
10 Year Warranty
UL & cUL Listed
Made in the USA
PRODUCT SPECIFICATIONS:
420,000 BTU/hour Input
4,800/85°F air flow output CFM/heat rise
230 vac, 60hz, single phase, 30A breaker
Acceptable fuels: used crankcase oil, transmission fluids, hydraulic oil, #2 heating oil (diesel fuel) and most synthetic oils
The Clean Energy CE-340 Waste Oil Boiler brings cost-saving waste oil technology to hydronic heating systems. Featuring many of the same design innovations found in our line of waste oil furnaces, the CE-340 boiler allows businesses to create free hot water for radiant heat or other purposes by burning waste oil. It’s clean, safe and guaranteed to cut costs when compared to traditional boilers.
This next generation design features durable steel components, large-diameter flue tubes and a patented Clean Energy burner that turns used petroleum products into free heat. And as a high-mass/high-volume boiler system, it maintains a more consistent water temperature and more efficiently retains heat than other popular boilers.
Best of all, Clean Energy designed the CE-340 Waste Oil Boiler to be easy to install and maintain. Its front and back doors easily open for straight-through cleaning, while large, straight-through flue tubes reduce ash buildup and allow for a longer interval between cleanings.
PRODUCT FEATURES:
Front and rear doors open for easy, straight-through cleaning without removing stack
Wet Base Fire Tube Boiler – reduces hot spots and deterioration
Hotsy Equipment Co.’s Most Popular Pressure Washer!
The 795SS & 895SS Series offers a nice balance of Hotsy rugged cleaning performance and entry-level affordability. This series offers machine configurations with both direct-drive & belt-drive models. The 700 Series’ multiple fuel and electrical options makes it ideal for meeting the needs of any & all commercial or industrial users. The 700 Series is powered by a Hotsy pump (complete with a 7 year warranty) and, as with the entire Hotsy line, is ETL safety certified to meet UL-1776 standards.
Click the “Email Us” button below to schedule a free machine demonstration!
Hotsy’s Newest Hot Water Pressure Washer – An Evolution of the 555SS.
The Hotsy 555HE features a high-efficiency downdraft burner delivering higher cleaning performance and lower operating costs. The stainless steel coil cover provides extra durability against the elements and rugged operating conditions. Auto-Start/Stop is a standard feature and offers increased efficiency in low voltage situations. The Hotsy triplex, direct drive, positive-displacement CERAMIC PLUNGER pump carries a 7-year warranty and a 5-year warranty on the heating coil. The Hotsy 555HE is ETL-certified to UL-1776 safety standards.
The 500 Series delivers affordable and rugged cleaning power for a broad spectrum of applications, ranging from agriculture to building maintenance. The 500 Series is compact, evenly balanced, easy to maneuver, and engineered with the operator in mind. All 500 Series models are ETL safety certified to meet UL-1776 standards.
By utilizing Hotsy’s Quick Coupler Nozzles, users can adapt to all styles of pressure washing by switching between multiple degree sizes. 0º nozzles will offer the most cutting pressure for difficult jobs while 40º will offer a wide spray for general cleaning. The Hotsy 4-Pack Color-Coded Quick Coupler Nozzle Sets contain a complete set of 4 quick coupler nozzles at 0º, 15º, 25º and 40º.
PRODUCT FEATURES
Available Configurations: Orifice sizes 3.5 to 6.5 – sizes increase by .5
Each pack includes one 0º nozzle, one 15º nozzle, one 25º nozzle and one 40º nozzle
“Orifice” size is dictated by pressure washer’s max pressure (PSI) and max flow rating (GPM)
The Gas Engine -Direct Drive Series consists of the most compact and portable hot water pressure washers on the market; all you need is water and you can clean anywhere anytime. Powered by reliable Honda engines, the five models offer a broad range of cleaning power, from 3.0 to 4.0 GPM and from 2400 to 3500 PSI. All models feature a standard pressure switch, Hotsy’s highly efficient Triplex pump (backed by Hotsy’s 7-year pump warranty) and are ETL safety certified.
Test drive a Hotsy! Click “Email Us” below and schedule your free Hotsy demo, today!
Hotsy’s Gas Engine – Belt Drive Series is designed to fit the needs of any end-user. This portable hot water washer has the versatility to simply convert to a skid unit for trailer-mounted or stationary use. Powered by reliable Honda gasoline engines, the three models offer a broad range of cleaning power, from 3.0 to 4.6 GPM and from 3000 to 3500 PSI. All models feature a standard pressure switch, the Hotsy Triplex pump (backed by Hotsy’s 7-year pump warranty) and are ETL safety certified.
Schedule your free product demo by clicking the “Email Us” button, today!