Clean Energy CE-140 Waste Oil Furnace

SMALL HEATER CREATES BIG SAVINGS, FOR UP TO 4,000 SQ. FT.

The Clean Energy Heating Systems CE-140 Waste Oil Furnace is an entry level waste oil heater that’s perfect for a garage with 1 to 4 bays. With up to 140,000 BTU’s of heating output coupled to the innovative new design, it’s a very cost-effective way to heat smaller spaces.

All Clean Energy furnaces are engineered from the ground up to burn waste oils and comply with all EPA regulations. They easily install and provide for longer intervals between cleanings. Their low-profile design and flexible configuration is ideal for areas with limited ceiling height and other creative installation requirements.

Best of all, every Clean Energy waste oil furnace is built with an exclusive, patent-pending stainless steel heat exchanger and flue tubes. This next-generation design ensures long-lasting durability and highly efficient operation for years to come.

PRODUCT FEATURES:

  • Stainless Steel Heat Exchanger and Flue Tubes – Prevents rust & Increases the Life of the Furnace!
  • Heat Exchanger and Flue Tubes are designed to limit heat escape & maximize the heat produced
  • Flue Tubes are swedged, not welded, to resist cracking over years of heavy use
  • Digital Wall-Thermostat & Digital, programmable burner control for reliable operation in all conditions
  • Over-Center Latches allow for easy clean-out without tools
  • 10 Year Warranty
  • UL & cUL Listed
  • Made in the USA

PRODUCT SPECIFICATIONS:

  • 140,000 BTU/hour Input
  • 1,700/75°F, air flow output CFM/heat rise
  • 115vac, 60hz, single phase, 20A breaker
  • Acceptable fuels: used crankcase oil, transmission fluids, hydraulic oil, #2 heating oil (diesel fuel) and most synthetic oils
  • 14,000 volt Burner with Interrupted Duty Ignition
  • 77″l x 28″h x 26″w (w/burner and blower)
  • 430 lbs hanging weight

INTERESTED IN THIS PRODUCT?

Call us

Clean Energy CE-180 Waste Oil Furnace

Big Innovation in a Small Package, for up to 5,000 sq. ft.

Our CE-180 Waste Oil Furnace is a strong performer for a 3 to 6 bay garage. With up to 175,000 BTU’s of output coupled to an innovative design, it’s a cost-effective and eco-friendly way to heat garages, workshops and other small to medium-sized spaces.

All Clean Energy furnaces are engineered from the ground up to burn waste oils and comply with all EPA regulations. They easily install and provide for longer intervals between cleanings. Their low-profile design and flexible configuration is ideal for areas with limited ceiling height and other creative installation requirements.

Best of all, every Clean Energy waste oil furnace is built with an exclusive, patent-pending stainless steel heat exchanger and flue tubes. This next-generation design ensures long-lasting durability and highly efficient operation for years to come.

PRODUCT FEATURES:

  • Stainless Steel Heat Exchanger and Flue Tubes – Prevents rust & Increases the Life of the Furnace!
  • Heat Exchanger and Flue Tubes are designed to limit heat escape & maximize the heat produced
  • Flue Tubes are swedged, not welded, to resist cracking over years of heavy use
  • Digital Wall-Thermostat & Digital, programmable burner control for reliable operation in all conditions
  • Over-Center Latches allow for easy clean-out without tools
  • 10 Year Warranty
  • UL & cUL Listed
  • Made in the USA

PRODUCT SPECIFICATIONS:

  • 175,000 BTU/hour Input
  • 1,700/80°F, air flow output CFM/heat rise
  • 115vac, 60hz, single phase, 20A breaker
  • Acceptable fuels: used crankcase oil, transmission fluids, hydraulic oil, #2 heating oil (diesel fuel) and most synthetic oils
  • 14,000 volt Burner with Interrupted Duty Ignition
  • 83″l x 28″h x 26″w

INTERESTED IN THIS PRODUCT?

Call us

Clean Energy CE-250 Waste Oil Furnace

Big BTU’s & Big Innovation, for up to 7,000 sq. ft.

The CE-250 Waste Oil Furnace is a strong, eco-friendly furnace that’s been designed to efficiently heat a 5 to 8 bay garage. With up to 245,000 BTU’s of output and all of Clean Energy’s patent-pending design advances, it’s a powerful way to heat warehouses, garages and other large spaces that’s as eco-friendly as it is economical.

All Clean Energy furnaces are engineered from the ground up to burn waste oils and comply with all EPA regulations. They easily install and provide for longer intervals between cleanings. Their low-profile design and flexible configuration is ideal for areas with limited ceiling height and other creative installation requirements.

Best of all, every Clean Energy waste oil furnace is built with an exclusive, patent-pending stainless steel heat exchanger and flue tubes. This next-generation design ensures long-lasting durability and highly efficient operation for years to come.

PRODUCT FEATURES:

  • Stainless Steel Heat Exchanger and Flue Tubes – Prevents rust & Increases the Life of the Furnace!
  • Heat Exchanger and Flue Tubes are designed to limit heat escape & maximize the heat produced
  • Flue Tubes are swedged, not welded, to resist cracking over years of heavy use
  • Digital Wall-Thermostat & Digital, programmable burner control for reliable operation in all conditions
  • Over-Center Latches allow for easy clean-out without tools
  • 10 Year Warranty
  • UL & cUL Listed
  • Made in the USA

PRODUCT SPECIFICATIONS:

  • 245,000 BTU/hour
  • 2,700/90°F, air flow output CFM/heat rise
  • 115vac, 60hz, single phase, 30A breaker
  • Acceptable fuels: used crankcase oil, transmission fluids, hydraulic oil, #2 heating oil (diesel fuel) and most synthetic oils
  • 14,000 volt Burner with Interrupted Duty Ignition
  • 100″l x 28″h x 26″w

INTERESTED IN THIS PRODUCT?

Call us

Clean Energy CE-330 Waste Oil Furnace

The Biggest Furnace & The Best Savings, for up to 9,000 sq. ft.

The Clean Energy Heating Systems CE-330 Waste Oil Furnace is our largest heater, and is perfect for quickly and effectively heating a garage with 7 or more bays. With up to 325,000 BTU’s of output coupled to our innovative new furnace design, the CE-330 is truly a hot performer.

All Clean Energy furnaces are engineered from the ground up to burn waste oils and comply with all EPA regulations. They easily install and provide for longer intervals between cleanings. Their low-profile design and flexible configuration is ideal for areas with limited ceiling height and other creative installation requirements.

Best of all, every Clean Energy waste oil furnace is built with an exclusive, patent-pending stainless steel heat exchanger and flue tubes. This next-generation design ensures long-lasting durability and highly efficient operation for years to come.

PRODUCT FEATURES:

  • Stainless Steel Heat Exchanger and Flue Tubes – Prevents rust & Increases the Life of the Furnace!
  • Heat Exchanger and Flue Tubes are designed to limit heat escape & maximize the heat produced
  • Flue Tubes are swedged, not welded, to resist cracking over years of heavy use
  • Digital Wall-Thermostat & Digital, programmable burner control for reliable operation in all conditions
  • Over-Center Latches allow for easy clean-out without tools
  • 10 Year Warranty
  • UL & cUL Listed
  • Made in the USA

PRODUCT SPECIFICATIONS:

  • 325,000 BTU/hour Input
  • 3,700/85°F, air flow output CFM/heat rise
  • 230 vac, 60hz, single phase, 30A breaker
  • Acceptable fuels: used crankcase oil, transmission fluids, hydraulic oil, #2 heating oil (diesel fuel) and most synthetic oils
  • 14,000 volt Burner with Interrupted Duty Ignition
  • 111″l x 32″h x 26″w

INTERESTED IN THIS PRODUCT?

Call us

Clean Energy CE-440 Waste Oil Furnace

Our Biggest Furnace Generates the Most Savings

The NEW CE-440 Waste Oil Furnace is Clean Energy’s largest and most powerful furnace yet, designed to turn used oil into free heat in even the biggest and tallest spaces. With up to 420,000 BTUs of heating power and all of Clean Energy’s patent-pending design advances, it’s the ultimate way to heat warehouses, garages and other large spaces.

All Clean Energy furnaces are engineered from the ground up to burn waste oils and comply with all EPA regulations. They easily install and provide for longer intervals between cleanings. Their low-profile design and flexible configuration is ideal for areas with limited ceiling height and other creative installation requirements.

Best of all, every Clean Energy waste oil furnace is built with an exclusive, patent-pending stainless steel heat exchanger and flue tubes. This next-generation design ensures long-lasting durability and highly efficient operation for years to come.

PRODUCT FEATURES:

  • Stainless Steel Heat Exchanger and Flue Tubes – Prevents rust & Increases the Life of the Furnace!
  • Heat Exchanger and Flue Tubes are designed to limit heat escape & maximize the heat produced
  • Flue Tubes are swedged, not welded, to resist cracking over years of heavy use
  • Digital Wall-Thermostat & Digital, programmable burner control for reliable operation in all conditions
  • Over-Center Latches allow for easy clean-out without tools
  • 10 Year Warranty
  • UL & cUL Listed
  • Made in the USA

PRODUCT SPECIFICATIONS:

  • 420,000 BTU/hour Input
  • 4,800/85°F air flow output CFM/heat rise
  • 230 vac, 60hz, single phase, 30A breaker
  • Acceptable fuels: used crankcase oil, transmission fluids, hydraulic oil, #2 heating oil (diesel fuel) and most synthetic oils
  • 14,000 volt Burner with Interrupted Duty Ignition
  • 127″l x 34″h x 33″w

INTERESTED IN THIS PRODUCT?

Call us

Clean Energy CE-340 Waste Oil Boiler

The Clean Energy CE-340 Waste Oil Boiler brings cost-saving waste oil technology to hydronic heating systems. Featuring many of the same design innovations found in our line of waste oil furnaces, the CE-340 boiler allows businesses to create free hot water for radiant heat or other purposes by burning waste oil. It’s clean, safe and guaranteed to cut costs when compared to traditional boilers.

This next generation design features durable steel components, large-diameter flue tubes and a patented Clean Energy burner that turns used petroleum products into free heat. And as a high-mass/high-volume boiler system, it maintains a more consistent water temperature and more efficiently retains heat than other popular boilers.

Best of all, Clean Energy designed the CE-340 Waste Oil Boiler to be easy to install and maintain. Its front and back doors easily open for straight-through cleaning, while large, straight-through flue tubes reduce ash buildup and allow for a longer interval between cleanings.

PRODUCT FEATURES:

  • Front and rear doors open for easy, straight-through cleaning without removing stack
  • Wet Base Fire Tube Boiler – reduces hot spots and deterioration
  • ASME Certified
  • 8” exhaust stack
  • Burner with Interrupted Duty Ignition
  • UL and cUL Listed
  • Made in the USA

PRODUCT SPECIFICATIONS:

  • 2.4 GPH fuel flow rate
  • 335,000 BTU/hr input (approx.)
  • 275,000 BTU/hr output (approx.)
  • 65 gallon boiler water volume
  • Supply 2” NPT / Return 2” NPT
  • 115V / 60 Hz  20 AMP electric
  • Boiler weight (dry) 1000 lbs.
  • Heating surface 62 ft²

INTERESTED IN THIS PRODUCT?

Call us

HD Electric Series

Hotsy’s Most Popular Cold Water Pressure Washer is Now Electric!

The Hotsy HD Electric Series is powered by a durable, direct-drive Baldor Motor and comes standard with Hotsy’s Most Reliable Pump (backed by an industry-leading 7 year warranty). The HD Series is mounted on a weld-free, corrosion resistant frame equipped with puncture-proof/flat-free tires. A 50 ft. wire-braided hose, spring-loaded trigger gun, and 5 quick-couple nozzles are also included with the purchase of a Hotsy HD Series Washer. As with all Hotsy Pressure Washers, the HD Series is ETL safety certified.

PRODUCT FEATURES

  • Max Pressure Rating: 1000-2000 PSI
  • Flow Rating: 1.9-3.5 GPM
  • Motor Horsepower: 1.5-5 HP
  • Voltage/Phase: 
    • 120/1
    • 230/1

INTERESTED IN THIS PRODUCT?

Call us

Hotsy 4000 PSI Hose

Introducing the new Hotsy Hose. This hose is built to exceed the EN1829-2 Standard and will provide superior abrasion resistance that will increase the life of the hose. The new hose is rated up to 250°F and is available in 4000 and 6000 PSI. Both single-and double-wire braid hoses come with durable 8″ bend restrictors on both ends. The new hose has a “bite-the-wire” coupling that grips the hose better than any other design.

PRODUCT FEATURES

  • Configurations:  3/8” – 25’ 50’ 75’ 100’ 150’
  • Max Pressure Rating: 4000 PSI
  • Max Temperature Rating: 250º F
  • Unique Coupling: A “bite-the-wire” coupling actually reaches the wire braid for never-slip retention, far superior to the “compression” fittings used on conventional hoses.

INTERESTED IN THIS PRODUCT?

Call us

Hotsy 6000 PSI Hose

Introducing the new Hotsy Hose. This Hose is built to exceed the EN1829-2 Standard and will provide superior abrasion resistance that will increase the life of the hose. The new Hose is rated up to 250°F and is available in 4000 and 6000 PSI. Both single-and double-wire braid hoses come with durable 8″ bend restrictors on both ends. The new hose has a “bite-the-wire” coupling that grips the hose better than any other design.

PRODUCT FEATURES

  • Configurations:  3/8” – 25’ 50’ 75’ 100’ 150’
  • Max Pressure Rating: 6000 PSI
  • Max Temperature Rating: 250º F
  • Unique Coupling: A “bite-the-wire” coupling actually reaches the wire braid for never-slip retention, far superior to the “compression” fittings used on conventional hoses.

INTERESTED IN THIS PRODUCT?

Call us