SMALL HEATER CREATES BIG SAVINGS, FOR UP TO 4,000 SQ. FT.
The Clean Energy Heating Systems CE-140 Waste Oil Furnace is an entry level waste oil heater that’s perfect for a garage with 1 to 4 bays. With up to 140,000 BTU’s of heating output coupled to the innovative new design, it’s a very cost-effective way to heat smaller spaces.
All Clean Energy furnaces are engineered from the ground up to burn waste oils and comply with all EPA regulations. They easily install and provide for longer intervals between cleanings. Their low-profile design and flexible configuration is ideal for areas with limited ceiling height and other creative installation requirements.
Best of all, every Clean Energy waste oil furnace is built with an exclusive, patent-pending stainless steel heat exchanger and flue tubes. This next-generation design ensures long-lasting durability and highly efficient operation for years to come.
PRODUCT FEATURES:
Stainless Steel Heat Exchanger and Flue Tubes – Prevents rust & Increases the Life of the Furnace!
Heat Exchanger and Flue Tubes are designed to limit heat escape & maximize the heat produced
Flue Tubes are swedged, not welded, to resist cracking over years of heavy use
Digital Wall-Thermostat & Digital, programmable burner control for reliable operation in all conditions
Over-Center Latches allow for easy clean-out without tools
10 Year Warranty
UL & cUL Listed
Made in the USA
PRODUCT SPECIFICATIONS:
140,000 BTU/hour Input
1,700/75°F, air flow output CFM/heat rise
115vac, 60hz, single phase, 20A breaker
Acceptable fuels: used crankcase oil, transmission fluids, hydraulic oil, #2 heating oil (diesel fuel) and most synthetic oils
Big Innovation in a Small Package, for up to 5,000 sq. ft.
Our CE-180 Waste Oil Furnace is a strong performer for a 3 to 6 bay garage. With up to 175,000 BTU’s of output coupled to an innovative design, it’s a cost-effective and eco-friendly way to heat garages, workshops and other small to medium-sized spaces.
All Clean Energy furnaces are engineered from the ground up to burn waste oils and comply with all EPA regulations. They easily install and provide for longer intervals between cleanings. Their low-profile design and flexible configuration is ideal for areas with limited ceiling height and other creative installation requirements.
Best of all, every Clean Energy waste oil furnace is built with an exclusive, patent-pending stainless steel heat exchanger and flue tubes. This next-generation design ensures long-lasting durability and highly efficient operation for years to come.
PRODUCT FEATURES:
Stainless Steel Heat Exchanger and Flue Tubes – Prevents rust & Increases the Life of the Furnace!
Heat Exchanger and Flue Tubes are designed to limit heat escape & maximize the heat produced
Flue Tubes are swedged, not welded, to resist cracking over years of heavy use
Digital Wall-Thermostat & Digital, programmable burner control for reliable operation in all conditions
Over-Center Latches allow for easy clean-out without tools
10 Year Warranty
UL & cUL Listed
Made in the USA
PRODUCT SPECIFICATIONS:
175,000 BTU/hour Input
1,700/80°F, air flow output CFM/heat rise
115vac, 60hz, single phase, 20A breaker
Acceptable fuels: used crankcase oil, transmission fluids, hydraulic oil, #2 heating oil (diesel fuel) and most synthetic oils
Big BTU’s & Big Innovation, for up to 7,000 sq. ft.
The CE-250 Waste Oil Furnace is a strong, eco-friendly furnace that’s been designed to efficiently heat a 5 to 8 bay garage. With up to 245,000 BTU’s of output and all of Clean Energy’s patent-pending design advances, it’s a powerful way to heat warehouses, garages and other large spaces that’s as eco-friendly as it is economical.
All Clean Energy furnaces are engineered from the ground up to burn waste oils and comply with all EPA regulations. They easily install and provide for longer intervals between cleanings. Their low-profile design and flexible configuration is ideal for areas with limited ceiling height and other creative installation requirements.
Best of all, every Clean Energy waste oil furnace is built with an exclusive, patent-pending stainless steel heat exchanger and flue tubes. This next-generation design ensures long-lasting durability and highly efficient operation for years to come.
PRODUCT FEATURES:
Stainless Steel Heat Exchanger and Flue Tubes – Prevents rust & Increases the Life of the Furnace!
Heat Exchanger and Flue Tubes are designed to limit heat escape & maximize the heat produced
Flue Tubes are swedged, not welded, to resist cracking over years of heavy use
Digital Wall-Thermostat & Digital, programmable burner control for reliable operation in all conditions
Over-Center Latches allow for easy clean-out without tools
10 Year Warranty
UL & cUL Listed
Made in the USA
PRODUCT SPECIFICATIONS:
245,000 BTU/hour
2,700/90°F, air flow output CFM/heat rise
115vac, 60hz, single phase, 30A breaker
Acceptable fuels: used crankcase oil, transmission fluids, hydraulic oil, #2 heating oil (diesel fuel) and most synthetic oils
The Biggest Furnace & The Best Savings, for up to 9,000 sq. ft.
The Clean Energy Heating Systems CE-330 Waste Oil Furnace is our largest heater, and is perfect for quickly and effectively heating a garage with 7 or more bays. With up to 325,000 BTU’s of output coupled to our innovative new furnace design, the CE-330 is truly a hot performer.
All Clean Energy furnaces are engineered from the ground up to burn waste oils and comply with all EPA regulations. They easily install and provide for longer intervals between cleanings. Their low-profile design and flexible configuration is ideal for areas with limited ceiling height and other creative installation requirements.
Best of all, every Clean Energy waste oil furnace is built with an exclusive, patent-pending stainless steel heat exchanger and flue tubes. This next-generation design ensures long-lasting durability and highly efficient operation for years to come.
PRODUCT FEATURES:
Stainless Steel Heat Exchanger and Flue Tubes – Prevents rust & Increases the Life of the Furnace!
Heat Exchanger and Flue Tubes are designed to limit heat escape & maximize the heat produced
Flue Tubes are swedged, not welded, to resist cracking over years of heavy use
Digital Wall-Thermostat & Digital, programmable burner control for reliable operation in all conditions
Over-Center Latches allow for easy clean-out without tools
10 Year Warranty
UL & cUL Listed
Made in the USA
PRODUCT SPECIFICATIONS:
325,000 BTU/hour Input
3,700/85°F, air flow output CFM/heat rise
230 vac, 60hz, single phase, 30A breaker
Acceptable fuels: used crankcase oil, transmission fluids, hydraulic oil, #2 heating oil (diesel fuel) and most synthetic oils
The NEW CE-440 Waste Oil Furnace is Clean Energy’s largest and most powerful furnace yet, designed to turn used oil into free heat in even the biggest and tallest spaces. With up to 420,000 BTUs of heating power and all of Clean Energy’s patent-pending design advances, it’s the ultimate way to heat warehouses, garages and other large spaces.
All Clean Energy furnaces are engineered from the ground up to burn waste oils and comply with all EPA regulations. They easily install and provide for longer intervals between cleanings. Their low-profile design and flexible configuration is ideal for areas with limited ceiling height and other creative installation requirements.
Best of all, every Clean Energy waste oil furnace is built with an exclusive, patent-pending stainless steel heat exchanger and flue tubes. This next-generation design ensures long-lasting durability and highly efficient operation for years to come.
PRODUCT FEATURES:
Stainless Steel Heat Exchanger and Flue Tubes – Prevents rust & Increases the Life of the Furnace!
Heat Exchanger and Flue Tubes are designed to limit heat escape & maximize the heat produced
Flue Tubes are swedged, not welded, to resist cracking over years of heavy use
Digital Wall-Thermostat & Digital, programmable burner control for reliable operation in all conditions
Over-Center Latches allow for easy clean-out without tools
10 Year Warranty
UL & cUL Listed
Made in the USA
PRODUCT SPECIFICATIONS:
420,000 BTU/hour Input
4,800/85°F air flow output CFM/heat rise
230 vac, 60hz, single phase, 30A breaker
Acceptable fuels: used crankcase oil, transmission fluids, hydraulic oil, #2 heating oil (diesel fuel) and most synthetic oils
The Clean Energy CE-340 Waste Oil Boiler brings cost-saving waste oil technology to hydronic heating systems. Featuring many of the same design innovations found in our line of waste oil furnaces, the CE-340 boiler allows businesses to create free hot water for radiant heat or other purposes by burning waste oil. It’s clean, safe and guaranteed to cut costs when compared to traditional boilers.
This next generation design features durable steel components, large-diameter flue tubes and a patented Clean Energy burner that turns used petroleum products into free heat. And as a high-mass/high-volume boiler system, it maintains a more consistent water temperature and more efficiently retains heat than other popular boilers.
Best of all, Clean Energy designed the CE-340 Waste Oil Boiler to be easy to install and maintain. Its front and back doors easily open for straight-through cleaning, while large, straight-through flue tubes reduce ash buildup and allow for a longer interval between cleanings.
PRODUCT FEATURES:
Front and rear doors open for easy, straight-through cleaning without removing stack
Wet Base Fire Tube Boiler – reduces hot spots and deterioration